Preliminary Work
WARNING:
Vehicle can fall down
- Risk of squashing or crushing
- Risk of damage to the vehicle
→ Do not place any solid objects under the raised vehicle.
→ Ensure that the lifting platform is prevented from lowering.
→ Remove solid objects before lowering the vehicle.
→ Raise the vehicle only at the jacking points provided.
→ The outer jacking points should be used primarily.
WARNING:
Danger of objects or loads falling down
- Risk of squashing or crushing
→ Secure components to prevent them from falling down.
- Support the engine.
- 1.1. Retaining device 9624/3
must be screwed to the cross member. Then turn spindle upwards and support engine.
Automatic vehicles:
- Remove automatic transmission.
- Remove drive plate for converter.
Manual transmission vehicles:
- Remove transmission.
5-speed transmission: → Removing transmission .
6-speed transmission: → Removing transmission .
Information
Loosen and tighten screws on the component according to specifications.
- Remove the clutch.
→ Removing Clutch .
- Remove flywheel.
- 1.1. Retaining device 9624/3
must be screwed to the cross member. Then turn spindle upwards and support engine.