Adjusting The Adjusting Eccentric For Locating Peg

Fig 1: Installation Position Of Adjusting Eccentric

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. Position adjusting eccentric on the body and tighten with the fastening nut 1. → Tightening torque: 9.7 Nm (7.0 ftlb.) 
2. Adjust upper part of adjusting eccentric 2 to match contour of side panel by screwing lower part of adjusting eccentric 3 in or out in direction of travel. → WM 5X00IN DIAGRAM - BODY GAP DIMENSIONS (ALL MODELS)
   Fig 2: Adjusting Eccentric For Peg

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.