Assembling Hood Frame: Notes

→ Secure roll-over bar with hood frame on assembly fixture.

Information 

• Only use blind rivets from the parts package. 

Information 

• This document describes how to re-assemble the convertible top frame on a roll-over bar that has been removed. 
• All convertible-top components described here can also be removed and installed on the vehicle except for the main folding top bow and the convertible top support. 
  Fig 1: Identifying Hood Frame Components

  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Roll-over bar
  2. Hood support
  3. B-pillar
  4. Roof frame
  5. Main bow
  6. Top tension strap
  7. Corner bow
  8. Bottom tension strap
  9. Tension bow
  10. Tension cable
  11. Water drip pan

1. Fit roll-over bar on assembly fixture. → 6972IN MOUNTING ROLL-OVER BAR ON ASSEMBLY FIXTURE