LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> Boxster Spyder, Automatic DCT >> Repair and Diagnosis >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> 61 - Convertible Top, Hardtop -- 987-BOXSTER >> WM 613055 Replacing Hood Frame (BOXSTER, BOXSTER S, BOXSTER S, BOXSTER S LIM. Ed. "Orange", BOXSTER S "RS 60 SPYDER", BOXSTER "Sport Edition", BOXSTER S "Sport Edition", BOXSTER S "PORSCHE Design Edition 2", BOXSTER S Black Edition) >> Assembling Hood Frame >> Installing Convertible Top Support

Installing Convertible Top Support

  1. Place convertible top support -1-  on roll-over bar from outside -2-  , position it correctly and screw down with the three fastening screws -3-  . Tightening torque → Tightening torque: 23 Nm (17 ftlb.) 
    Fig 1: Identifying Convertible Top Support And Screw
    G09590402Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals