Installing B-Pillar With Control Arm And Lower Lever
- Press Teflon sleeves -1-
at both sides into the bore on the convertible top support -2-
.
- Position B-pillar -3-
with control arm and lever on convertible top support and join with the pin -4-
(8 x 53 mm) -arrow-
.
- Press retaining clip -5-
into the pin.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Place main folding top bow -1-
in a vertical position. Position lower lever -2-
on main folding top bow and join with the pin -3-
(8 x 25 mm) -arrow-
.
- Press retaining clip -4-
into the pin.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.