LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> Boxster Spyder, Automatic DCT >> Repair and Diagnosis >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> 61 - Convertible Top, Hardtop -- 987-BOXSTER >> WM 613055 Replacing Hood Frame (BOXSTER, BOXSTER S, BOXSTER S, BOXSTER S LIM. Ed. "Orange", BOXSTER S "RS 60 SPYDER", BOXSTER "Sport Edition", BOXSTER S "Sport Edition", BOXSTER S "PORSCHE Design Edition 2", BOXSTER S Black Edition) >> Assembling Hood Frame >> Installing B-Pillar Seal

Installing B-Pillar Seal

  1. Place seal -1-  on B-pillar -2- (-arrows A-)  and position it correctly.
  2. Pull seal receiver -3-  in at the bore -4-  on the B-pillar -arrow B-  .
  3. Screw down B-pillar seal on the door window aperture with the five fastening screws -5-  .
  4. Screw down B-pillar seal at the bottom of the B-pillar with the two fastening screws -6- (assembly tool with T15 insert 9744)  .
    5. Fig 1: Installing B-Pillar Seal
    G09590408Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals