Connecting Control Arm And Lower Lever With B-Pillar
- Press Teflon sleeves -1-
at both sides into the bore on the control arm -2-
.
- Position control arm -2-
on lever -3-
and join with the pin -4-
(8 x 25 mm) -arrow-
.
- Press retaining clip -5-
into the pin.
- Press Teflon sleeves -1-
at both sides into the bores on the lower lever -2-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Position control arm and lower lever on B-pillar -3-
and join with the pin -4-
(8 x 30 mm) -arrow-
.
- Press retaining clip -5-
into the pin.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.