Fastening The Slide

Fig 1: Identifying Installation Position Of Hood Covering

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Pull cord -3- from below through the loop on the hood covering -arrow B- . Engage cord with knot on slide -2- (-arrow A-).
Information

Make sure that the cord is routed above the pin of the main folding top bow.
Position slide -2- over leaf spring -arrow C- and clip onto the main folding top bow. Drive in expanding pin of expansion rivet -1- (-arrow D-).

Fig 2: Pulling Cord From Hood Covering

Courtesy of PORSCHE CARS NORTH AMERICA, INC.