Fastening Hood Covering On The Tension Bow

Fig 1: Identifying Installation Position Of Hood Covering

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. Position hood covering -1-  , with the Centre coinciding with the marking on the tension bow -inset-  , in the groove of the tension bow -3-  . Use a plastic wedge -4-  to press in from the Centre outwards.
2. After pressing the hood covering -1-  into the tension bow -3-  , check the Centre position once more and correct if necessary.
Fig 2: Fastening Hood Covering On Tension Bow
Courtesy of PORSCHE CARS NORTH AMERICA, INC.