Fastening Hood Covering At The Sides Of The Roof Frame

Fig 1: Identifying Installation Position Of Hood Covering

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. Lay the hood covering -2-  to the front and guide the shaped sheetmetal part into the roof frame from above.
2. Fasten the hood covering -2-  with the fastening screws -1-  , starting from the front bottom side of the roof frame. Tightening torque → Tightening torque: 3.5 Nm (2.5 ftlb.) 
Fig 2: Fastening Hood Covering At Sides Of Roof Frame
Courtesy of PORSCHE CARS NORTH AMERICA, INC.