Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Gap from hardtop to windscreen frame | Adjustment dimension | 5.5 mm | +/-1.0 mm | ||
| Offset from hardtop to cowl panel | Hardtop only lowered | Check dimension | 2 mm | +/-1.0 mm | |
| Hardtop to side panel | on the left and right of the vehicle | Adjustment dimension | 5.5 mm | +/-3.5 mm | |
| Hardtop to convertible top compartment lid | on the left and right of the vehicle | Adjustment dimension | 5.5 mm | +/-3.5 mm | |
| Mounting plate for hardtop | Tightening torque | 10 Nm (7.5 ftlb.) |