Removing Weather Protector For Hood
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Open doors and door windows.
- Open rear lid -1-
(-arrow A-
).
- Unclip lid support -2-
from the rear lid and fit it into the mounting point at the left -3-
in front of the hood compartment -arrow B-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Pull tensioning elements for the weather protector fins -1-
off the red tension bars -2-
on the rear lid -arrow A-
and secure to the Velcro strips -3-
on the weather protector -arrows B-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Unbutton weather protector -1-
from the hood -2-
. The Tenax buttons can only be released by pulling lightly on the grip cap.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Unclip outer corner bow -1-
at the top -arrow A-
and pull it out of the vehicle trim panel at the bottom -arrow B-
.
- Remove weather protector -2-
(-arrows C-
).
Courtesy of PORSCHE CARS NORTH AMERICA, INC.