LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> Boxster Spyder, Automatic DCT >> Repair and Diagnosis >> Accessories & Equipment >> Window Motors & Regulators >> 64 - Glazing, Window Control -- 987-BOXSTER-CAYMAN >> WM 648619 Removing And Installing Rear Window (All Models) >> Removing Rear Window

Removing Rear Window

Information 

  1. Lower the door window.
  2. Pull off the connector for the rear window heater -1-  on the rear window.

    Information 

    • To avoid damaging the electric line when cutting out the rear window, affix this to the rear window with adhesive tape. 
  3. Stick connector for rear window heater on the rear window at the left and right with adhesive tape -2-  .
    Fig 1: Disconnecting Connector For Rear Window Heater
    G09590875Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Remove rear window with the cutting wire separator. → Removing Glass With Cutting Wire Separator 
    Fig 2: Separating Glass (P1)
    G09590876Courtesy of PORSCHE CARS NORTH AMERICA, INC.


Information 

  1. Lower the door window.
  2. Pull off the connector for the rear window heater -1-  on the rear window.

    Information 

    • To avoid damaging the electric line when cutting out the rear window, affix this to the rear window with adhesive tape. 
  3. Stick connector for rear window heater on the rear window at the left and right with adhesive tape -2-  .
    Fig 1: Disconnecting Connector For Rear Window Heater
    G09590894Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Remove rear window with the cutting wire separator. → Removing Glass With Cutting Wire Separator 
    Fig 2: Separating Glass (P1)
    G09590895Courtesy of PORSCHE CARS NORTH AMERICA, INC.