Removing And Installing Balancing Weight For Rear Lid

Information 

When screwing on the balancing weight for the rear lid, use an open-ended wrench on the buffer stops to prevent them from turning.

1. Coat fastening screws -1-  with medium-strength screw locking agent.
2. Position balancing weight -2-  on the rear lid -3- (-arrow-)  and secure with the fastening screws -1-  . → Tightening torque: 9.7 Nm (7.5 ftlb.) 
   Fig 1: Installing Balancing Weight

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.