Removing Front Inner Side Section

Fig 1: Identifying Front Inner Side Section Position

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Remove center side member. → Removing Center Side Member
Milling off spotwelds
1. 2.1. Mill off spotwelds in area -A- using a spotweld cutter.
Fig 2: Identifying Spotwelds Area (A)
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Separating inert-gas welded seams
1. 3.1. Separate inert-gas welded seams in areas -A- and -B- from inside using a parting grinder.
Fig 3: Separating Inert-Gas Welded Seams Area
Courtesy of PORSCHE CARS NORTH AMERICA, INC.