LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> Boxster S, Standard >> Repair and Diagnosis >> Collision >> Body Panels >> 53 - Body Rear - 987 - BOXSTER & CAYMAN >> WM 531655 Replacing Closing Cross Member (All Models) >> Subsequent Work >> Subsequent Work For Body Repairs

Subsequent Work For Body Repairs

  1. Remove vehicle from the straightening bench.
  2. Clean welded joints and sheetmetal flanges with a wire brush.
  3. Prime flange areas with 2K primer.
  4. Restore standard sealing with body sealant.

    → WM 5X00IN SEAM SEALS (ALL MODELS)

  5. Restore standard undersealing with underbody sealant.

    → Diagram: Underbody Protection

  6. Paint repair area and adjacent surfaces, if necessary.
  7. Install removed add-on parts in the repair area.
  8. Apply cavity preservation.
scientia non olet · About LEMON Manuals