LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> Boxster S, Standard >> Repair and Diagnosis >> Body & Frame >> Seats >> 72 - Seat Frames -- 987-BOXSTER-CAYMAN >> WM 721419 Removing And Installing Air Cushion For Seat (All Models) >> Installing Air Cushion For Backrest >> Installing Air Cushion For Seat

Installing Air Cushion For Seat

  1. Position air cushion for seat -3-  on the air cushion support plate -Arrow A-  .
    Fig 1: Installing Seat Air Cushion
    G09592125Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Information 

    The air cushion for the seat is fastened only with the rear air cushion on the air cushion support plate.

  2. Secure the air cushion for the seat -3-  . Use the two expanding clips -1-  to fasten -Arrows B-  it. To do this, the pins -2-  must be forced into the expanding clips -1-  by pressing -Arrow C-  .
  3. The air cushion support plate -3-  must be fitted into the seat frame -4-  by inserting -Arrow A-  the guides into the seat frame.
    Fig 2: Tightening Fastening Screws On Air Cushion Support Plate
    G09592126Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Fasten the air cushion support plate -3-  with the two fastening screws -2-  .
  5. The air cushion for the seat -1-  must be folded over -Arrow B-  and aligned with the air cushion support plate -3-  .
  6. Push the white hose -1-  onto the air cushion control valve.
    Fig 3: Pushing Hose Onto Air Cushion Control Valve
    G09592127Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  7. Position support -2-  with connected motor and air cushion control valve and screw down with the two fastening screws -1-  .
    Fig 4: Securing Compressor And Air Distributor Valve Support
    G09592128Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals