LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> Boxster S, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> 68 - Interior Equipment -- 987-BOXSTER-CAYMAN >> WM 683019 Removing And Installing Cup Holder (All Models) >> Installing Cup Holder

Installing Cup Holder

  1. Push cup holder -1-  into the shaft of the glove compartment.
  2. Tighten fastening screws -2-  . Tightening torque → Final tightening: 7.2 ftlb. 
    3. Fig 1: Installing Cup Holder
    G09591353Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals