LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> Boxster S, Automatic DCT >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 10 - Engine - Crankcase, Suspension -- 987-BOXSTER-CAYMAN >> WM 105219 Removing And Installing Crankcase Vent Line (Except CAYMAN Black Edition, CAYMAN S Black Edition, BOXSTER Black Edition, BOXSTER SPYDER, BOXSTER S "PORSCHE Design Edition 2", BOXSTER S Black Edition, CAYMAN R) >> Removing Crankcase Vent Line

Removing Crankcase Vent Line

  1. Remove holding clamp by unscrewing the Torx screw (M6 x 12) -arrow-  .
    Fig 1: Locating Holding Clamp Screw
    G09585096Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Release and disconnect rapid-action couplings on both cylinder heads -arrow-  .
    Fig 2: Locating Rapid-Action Coupling On Vent Line
    G09585097Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    Fig 3: Locating Rapid-Action Coupling (Cylinders 1 - 3)
    G09585098Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Unclip all line clips.
  4. Guide line out of the engine compartment.
scientia non olet · About LEMON Manuals