LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> Boxster S, Automatic DCT >> Repair and Diagnosis >> Collision >> Body Panels >> 55 - Lids, Flaps -- 987-BOXSTER-CAYMAN >> WM 553819 Removing And Installing Switching Element For Filler Flap (BOXSTER, BOXSTER S, BOXSTER LIM. Ed. "Orange", BOXSTER S LIM. Ed. "Orange", BOXSTER Black Edition, BOXSTER S "RS 60 SPYDER", BOXSTER "Sport Edition", BOXSTER S "Sport Edition", BOXSTER S "PORSCHE Design Edition 2", BOXSTER S Black Edition) >> Installing Switching Element For Filler Flap

Installing Switching Element For Filler Flap

  1. Engage switching element for filler flap into the emergency operation cable.
    Fig 1: Engaging Switching Element For Filler Flap Into Emergency Operation Cable
    G09589727Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Insert switching element for filler flap into the slots on the holder. Ensure that the locking bolt of the filler flap switching element is positioned in the opening of the side section.
  3. Secure the filler flap switching element with the two fastening screws -1-  .
    Fig 2: Securing Filler Flap Switching Element To Holder
    G09589728Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Insert the connector until it is felt to engage.
    Fig 3: Connecting Switching Element Connector
    G09589729Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  5. Check operation of the filler flap switching element.
scientia non olet · About LEMON Manuals