Move Convertible Top To Service Position
NOTE:
Operation of the hood in service position
- Risk of damage to hood frame and rear window
→ Do not move the hood to the "Close" position by electrical means when in service position.
- Switch on ignition.
- Unlock convertible top and raise convertible-top compartment lid to its top position.
- Switch off ignition and remove ignition key.
- Disengage strip on cloth covering -1- in a downward direction out of the combination holder -2- at the left and right.
- Raise convertible top -1- slightly at the rear -Arrow A- . Press the ball socket of the left and right tension cables -2- out of the ball head of the adjusting piece -3- (-Arrow B-) .
- Pull Velcro fastener of the retaining strap -1- off the tension bow and engage it on the centering journal -2- at the front.