Installing Front Wheel Housing Liner - Rear Section

Fig 1: Identifying Installation Position Of Front Wheel Housing Liner

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Information 

• Push in wheel housing liner towards the outside up to contact in fender stop position. 
• Ensure that the right wheel housing liner is guided through the opening on the wheel well. 
• Route drain hose for filling the tank on the right through the right wheel housing liner. 

1. Insert front wheel housing liner -A-  .
2. Fig 2: Identifying Front Wheel Housing Liner Part A And Fastening Screw And Nut

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Tighten fastening nuts -1-  to Tightening torque: 1.5 Nm (1 ftlb.) 

3. Tighten fastening screws -2-  to Tightening torque: 2 Nm (1.5 ftlb.)