LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> Boxster S, Automatic DCT >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> 74 - Seat UPHOLSTERIES, Cover -- 987-BOXSTER-CAYMAN >> WM 742019 Removing And Installing Cover For Front Middle Backrest (Air-Conditioned Comfort Seat) (All Models) >> Installing Cover For Front Middle Backrest

Installing Cover For Front Middle Backrest

  1. Place cover on the seat surface and plug in the plug connections for backrest seat heating -1-  (-arrows-  ).
    Fig 1: Connecting Plug Connections
    G09592688Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Information 

    Make sure that the connections are plugged in fully.

  2. Lock the intake plenum.
    1. 2.1. Fold up cover -1-  (-arrow A-  ).
    2. 2.2. Press intake plenum -2-  into the air duct -3-  (-arrow B-  ) until the locking lugs lock with an audible click.
      3. Fig 2: Locking Intake Plenum Connection
      G09592689Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Secure front cover.
    1. 3.1. Press in cover -1-  in the middle -arrows A-  until the locking lugs at the side engage.
    2. 3.2. Engage cover -1-  at the top of the backrest frame -2-  (-arrow B-  ).
      3. Fig 3: Securing Front Cover
      G09592690Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Secure cover at the back.
    1. 4.1. Press cover -1-  into the backrest shell -2-  at the bottom using a plastic wedge -3-  (-arrows-  ) until it locks with an audible click.
    Fig 4: Securing Cover At Back
    G09592691Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals