Removing Padding For Front Middle Backrest

Fig 1: Identifying Installation Position Of Padding For Front Middle Backrest (Folding Sports Bucket Seat)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. Release Velcro fasteners -1-  on the back of the padding -2-  all the way around (-Figure A-).
2. Fold cover -3-  over all the way around (-Figure B-).
Fig 2: Releasing Rear Cover
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
3. Carefully detach Velcro strip -1-  on the cover from the Velcro fastener on the front of the padding -2-  (-arrows-  ).
4. Take off the cover -3-  .
Fig 3: Detaching Cover At Front
Courtesy of PORSCHE CARS NORTH AMERICA, INC.