LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> Boxster S, Automatic DCT >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> 74 - Seat UPHOLSTERIES, Cover -- 987-BOXSTER-CAYMAN >> WM 741019 Removing And Installing Padding For Front Seat (All Models) >> Installing Padding For Front Seat >> Checking Seat Following Removal

Checking Seat Following Removal

  1. Connect the removed seat to the vehicle's wiring harness via test cable 9745 and test cable 9745/1.
  2. Connect electric plug to control module trim panel. → INSTALLING CONTROL PART TRIM PANEL
  3. Connect the battery. → 2706IN WORK INSTRUCTIONS AFTER DISCONNECTING THE BATTERY
  4. Switch on ignition.
  5. Carry out a function check on the seat components.
  6. Switch off ignition after function test and disconnect battery.
  7. Disconnect test cable 9745  and test cable 9745/1  .
scientia non olet · About LEMON Manuals