Tightening Seat Screws At Rear

Fig 1: Identifying Front Seat Installation Position

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

→ Always use new fastening screws and nuts following removal.

→ Observe specified tightening torques.

→ Carry out a visual inspection of all re-used parts.

Information 

Always replace the fastening screws on the front seat after customer service and reworking. The micro-self-locking or self-tapping screws must not be treated, greased or loosened and then screwed on again.

1. Tip seat forwards and position seat rails on the seat baseframe.
   Fig 2: Tightening Rear Seat Screws

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Screw left and right fastening screws -1-  into seat bracket -2-  and tighten to specified tightening torque → Final tightening: 50 Nm (37 ftlb.)  .