Installing Cover Strip

Fig 1: Identifying Cover Strip Of Door

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Information 

• The bonding surface must be free of dirt and grease. Clean with cleaning solution if necessary. 

1. Pull protective film off the bonding area of cover strip.
   Fig 2: Pulling Out Protective Film

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Position cover strip and apply. Centre notch in cover strip at height of bead.
   Fig 3: Installing Cover Strip

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
3. Press on cover strip firmly.