LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> Boxster Base, Standard >> Repair and Diagnosis >> Collision >> Body Panels >> 53 - Body Rear - 987 - BOXSTER & CAYMAN >> WM 536855 Replacing Rear Wheel Housing (All Models) >> Installing Rear Wheel Housing >> Installing Outer Rear Wheel Housing

Installing Outer Rear Wheel Housing

  1. Fitting outer rear wheel housing to the body
    1. 1.1. Fit outer rear wheel housing to the body and fix in place with tensioning clamps.
  2. Welding in outer rear wheel housing
    1. 2.1. Resistance spot-weld outer rear wheel housing in area -A-  .
    Fig 1: Identifying Welding Outer Rear Wheel Housing Area
    G09589524Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Welding in outer rear wheel housing
    1. 3.1. Resistance spot-weld outer rear wheel housing in area -A-  .
    Fig 2: Identifying Welding Outer Rear Wheel Housing Area (A)
    G09589525Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Install side panel. → Installing Side Section 


  1. Fitting outer rear wheel housing to the body
    1. 1.1. Fit outer rear wheel housing to the body and fix in place with tensioning clamps.
  2. Welding in outer rear wheel housing
    1. 2.1. Resistance spot-weld outer rear wheel housing in area -A-  .
    Fig 1: Identifying Welding Outer Rear Wheel Housing Area (A)
    G09589583Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Welding in outer rear wheel housing
    1. 3.1. Resistance spot-weld outer rear wheel housing in area -A-  .
    Fig 2: Identifying Welding Outer Rear Wheel Housing Area (A)
    G09589584Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Install side panel. → Installing Side Section 
scientia non olet · About LEMON Manuals