Installing Inner Rear Wheel Housing

Fitting inner rear wheel housing on the body
1. 1.1. Fit inner rear wheel housing on the body and secure to the straightening set.
2. 1.2. Fix inner rear wheel housing in place with tensioning clamps.
Welding in inner rear wheel housing
1. 2.1. Resistance spot-weld the inner rear wheel housing in area -A- .
Fig 1: Identifying Welding Inner Rear Wheel Housing Area (A)
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Welding in inner rear wheel housing
1. 3.1. Plug weld the inner rear wheel housing in areas -A, B, C- using inert gas.
Fig 2: Identifying Welding Inner Rear Wheel Housing Area (A, B And C)
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Welding in inner rear wheel housing
1. 4.1. Resistance spot-weld the inner rear wheel housing in areas -A, B, C- .
Fig 3: Identifying Welding Inner Rear Wheel Housing Area (A, B And C)
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Install rear inner side section. → Installing Rear Inner Side Section