Sticking On Protective Film

Information 

• Immediately before sticking on, wash off the areas on which you intend to stick the seal using isopropanol to ensure that all traces of silicone, grease and oil are completely removed  .

1. Stick on protective film.

Fig 1: Identifying Stick On Protective Film

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. 1.1. Pull off film for stickers and, ensuring there are no bubbles, stick on protective film -1- at -X= 540 mm-  so that the rubber buffer -2-  lies against the protective film -1-  when the rear lid is closed.
2. 1.2. Check protective film for bubbles and adhesion.