Installing Horn

Push in the horn in the holder and position the horn in the same way as the figure.

Fig 1: Identifying Horn With Holder
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Screw down the horns with the fastening nuts -1- . → M6: 7.5 ftlb .
Insert both electrical connectors until they perceptibly engage.

Fig 2: Installation Of Horn

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Position the holder with the horns on the body and screw down with the fastening nuts -2- . → M8: 17 ftlb .

Fig 3: Installation Of Holder
Courtesy of PORSCHE CARS NORTH AMERICA, INC.