LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> Boxster Base, Automatic DCT >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 53 - Body Rear - 987 - BOXSTER & CAYMAN >> WM 536855 Replacing Rear Wheel Housing (All BOXSTER Models) >> Preparing Connection Areas Of The Body For Installing The Rear Wheel Housing >> Preparing Connection Areas Of The Body For Installing The Outer Rear Wheel Housing

Preparing Connection Areas Of The Body For Installing The Outer Rear Wheel Housing

  1. Clean undersealing, adhesive residue and paint off the body connecting flanges in the marked area -A-  using a hot-air gun or rotary brush. Grind the connecting flanges until bare.
    Fig 1: Identifying Welding Cleaning Area (A)
    G09589605Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Coat spot-weld flange areas with zinc powder paint.
    1. 2.1. Coat all spot-weld flange areas with zinc powder paint.
scientia non olet · About LEMON Manuals