Characteristics:
- 6-piston fixed calliper with retaining pin
- Brake-piston damping plates in the brake pistons (individual)
Complaints/symptom: None |
Characteristics:
- 4-piston fixed calliper with two bars
- Brake-piston damping plates (connecting plate with vibration balancer) in the brake pistons.
Complaints/symptom:
Brake noise (squealing) on rear axle.
Remedial action:
Remedial action 1 (as per Workshop Manual)
- Install brake pads and brake-piston damping plates at the defined position with respect to the brake calliper.
- Check that the brake-piston damping plates are seated perfectly in the brake pistons and the brake pads are positioned correctly on the guide pins.
- Make sure that the brake-piston damping plates are bonded securely to the brake-pad backing plates.
- If Remedial action 1 does not resolve the problem, continue with Remedial action 2.
Remedial action 2/only proceed following consultation with the importer or customer!
- Install brake calliper with brake-pad retaining pins screwed in.
Part No. 997.352.425.12 (left), 997.352.426.12 (right).
References:
|