Revision intervals for race track use
At present, the following revision intervals are stipulated for race track use:
| At the latest, every 7, 000 km/4, 200 miles for race track use (cumulative) |
|---|
| Replace wheel hubs and wheel bearings on rear axle → 425819 REMOVING AND INSTALLING REAR WHEEL BEARING |
| Replace central lock bolts on rear axle → 440519 REMOVING AND INSTALLING WHEEL WITH CENTRAL BOLT |
| At the latest, every 14, 000 km/8, 400 miles for race track use (cumulative) |
|---|
| Replace wheel bearing housing on rear axle → 425219 REMOVING AND INSTALLING REAR WHEEL BEARING HOUSING (WHEEL CARRIER) |
| Replace wheel hubs and wheel bearings on front axle → 405719 REMOVING AND INSTALLING FRONT WHEEL BEARING |
| Replace central lock bolts on front axle → 440519 REMOVING AND INSTALLING WHEEL WITH CENTRAL BOLT |
| At the latest, every 28, 000 km/16, 800 miles for race track use (cumulative) |
|---|
| Replace wheel bearing housing on front axle → 405019 REMOVING AND INSTALLING FRONT WHEEL BEARING HOUSING → 405055 REPLACING FRONT WHEEL BEARING HOUSING |
See also → Additional maintenance for race track use - vehicles with central lock .