Conversion to conventional wheel mounting (instructions for one wheel)
| No. | Designation | Qty. | Removal | Installation |
|---|---|---|---|---|
| -1- | Hub cap for wheel bolt | 1 | Remove. | N/A |
| - | Hub cap | 1 | (Not fitted) | Use new hub cap (for conventional wheels), |
| -2- | Wheel bolt with cone ring (central bolt) | 1 | Remove. → 440519 REMOVING AND INSTALLING WHEEL WITH CENTRAL BOLT - section on "Removing" |
N/A |
| - | Wheel bolts (for conventional wheel mounting) | 5 | (Not fitted) | Use new wheel bolts
. Fit conventional wheel with five new wheel bolts. → 440519 REMOVING AND INSTALLING WHEEL |
| -3- | Wheel (tyre and disc wheel) | 1 | Remove tyre. Replace disc wheels (central bolts). |
Fit, balance and install tyres on new disc wheels (for conventional wheel mounting). Allocation can be found in PET and in the current Technical Information for wheels/tyres. → 444019 MOUNTING TYRES (REMOVING AND INSTALLING TYRES) - for vehicles with and without Tyre Pressure Monitoring (TPM) system → 440594 BALANCING/OPTIMISING WHEELS → 440519 REMOVING AND INSTALLING WHEEL - section on "Installing" |
| -4- | Lockable wheel bolt/locking mechanism | 1 | Remove. | N/A |
| -5- | Wheel hub | 1 | Replace wheel hub and wheel bearing (wheel bearing will be damaged during removal). → Removing front wheel bearing → Removing rear wheel bearing |
For allocation, Install new wheel bearing and wheel hub (for conventional wheel mounting). → Installing front wheel bearing → Installing rear wheel bearing |
| - | Wheel bearing (identical part with or without central bolts) | 1 | Will be damaged during removal. | Install new wheel bearing Installing front wheel bearing description for wheel hub -5- ). |
| -6- | Brake disc (grey cast iron or PCCB). | 1 | Following removal, remove driving pin -7-
. Re-use brake disc if OK. |
Install without driving pin -7- . |
| -7- | Wheel driver. | 5 | Remove. | N/A |