LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> 911 Speedster >> Repair and Diagnosis >> Suspension >> Front Suspension >> 44 - Wheels, Tires, Suspension Alignment -- CARRERA (997) >> WM 4400TW Adjustment Values For Suspension Alignment (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, Turbo S Coupe, Turbo S Coupe "Ed. 918 SPYDER", CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO) >> Vehicle Height

Vehicle Height

Information 

Vehicle height RoW/USA: Standard C4/C4S Targa RoW/USA: PASM C4/C4S Targa RoW: Performance C4/C4S RoW/USA: PASM 911 Turbo/911 Turbo S
Front axle 
Height with 18-inch wheels → Control value: 141 mm+/-10 mm  → Control value: 131 mm+/-10 mm  → Control value: 121 mm+/-10 mm  → Control value: 130 mm+/-10 mm 
Height with 19-inch wheels → Control value: 143 mm+/-10 mm  → Control value: 133 mm+/-10 mm  → Control value: 123 mm+/-10 mm  → Control value: 132 mm+/-10 mm 
From road contact surface to lower edge of hexagon-head bolt of cross-member screw connection to the body.
Rear axle 
Height with 18-inch wheels → Control value: 164 mm+/-10 mm  → Control value: 154 mm+/-10 mm  → Control value: 144 mm+/-10 mm  → Control value: 152 mm+/-10 mm 
Height with 19-inch wheels → Control value: 165 mm+/-10 mm  → Control value: 155 mm+/-10 mm  → Control value: 145 mm+/-10 mm  → Control value: 153 mm+/-10 mm 
From wheel contact surface to the locating bore in the rear-axle side section (between toe and camber eccentrics).