LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> 911 Speedster >> Repair and Diagnosis >> Suspension >> Front Suspension >> 40 - Front Wheel Suspension, Drive Shafts -- CARRERA (997) >> WM 405055 Replacing Front Wheel Bearing Housing (Except Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0) >> Replacing Front Wheel Bearing Housing - Subsequent Work

Replacing Front Wheel Bearing Housing - Subsequent Work

  1. Fit front wheel → 440519 REMOVING AND INSTALLING WHEEL .
  2. Tighten the central nut at the wheel carrier or, with the 911 Carrera 4/911 Turbo, the drive shaft fastening at the side of the wheel to 460 Nm (340 ftlb.). Actuate the brake while doing this.
  3. Check wheel alignment values on front axle and adjust if necessary → 449503 PERFORMING FRONT AND REAR SUSPENSION ALIGNMENT .
scientia non olet · About LEMON Manuals