LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> 911 Speedster >> Repair and Diagnosis >> Restraints >> Seat Belts >> 69 Occupant Protection/Personal Protection -- CARRERA (997) >> WM 696819 Removing And Installing AWS Control Unit (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0) >> Removing AWS Control Unit

Removing AWS Control Unit

Fig 1: Identifying AWS Control Unit Installation Position
G09827456Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Turn seat central connector -A-  at AWS holder to the left and remove from the holder.
    Fig 2: Loosening Seat Central Connector
    G09827457Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Unscrew the three fastening screws -1-  for the AWS holder on the seat bracket.
    Fig 3: Removing Fastening Screws From AWS Holder
    G09827458Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Release electric connector on AWS control unit -a-  , unplug and tilt the AWS holder to the right side.
  4. Unscrew the three fastening screws -2-  of the AWS control unit and remove the control unit.
    Fig 4: Removing Fastening Screws For AWS Control Unit
    G09827459Courtesy of PORSCHE CARS NORTH AMERICA, INC.