LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> 911 Speedster >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> A/C Compressor >> 87 - Air Conditioning -- CARRERA (997) >> WM 878319 Removing And Installing Pressure Switch (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS) >> Removing Pressure Switch

Removing Pressure Switch

The pressure switch is located in the radiator tank, right side in the direction of travel, under the cowl panel cover.

  1. Press release on electrical connector and disconnect from pressure switch.
    Fig 1: Removing Electrical Plug Connector
    G09830388Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Place one open-ended wrench on the hexagon of the pressure switch and a second open-ended wrench on the hexagon of the refrigerant line.
    Fig 2: Removing Pressure Switch
    G09830389Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Unscrew pressure switch from refrigerant line and remove.