Fault code 40: Diagnosis/troubleshooting
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSIS/TROUBLESHOOTING (FAULT CODE 40)
| Work instruction | Display OK | If not OK | ||
|---|---|---|---|---|
| 1 | Check transponder coil. |
|
20 - 25 at 20 °C. Step 2 |
-> Step 5 |
| 2 | Check wiring from transponder coil to signal converter for short circuit to ground. |
|
Step 3 | Repair wiring harness. ->End |
| 3 | Check wiring from transponder coil to signal converter for short circuit to B+. |
|
0 V Step 4 |
Repair wiring harness. ->End |
| 4 | Check wiring from transponder coil to signal converter for open circuit. |
|
Step 6 | Repair wiring harness. ->End |
| 5 |
|
->End | ||
| 6 |
|
->End | ||