Fault code 21: Diagnosis/troubleshooting
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSIS/TROUBLESHOOTING (FAULT CODE 21)
| Work instruction | Display OK | If not OK | ||
|---|---|---|---|---|
| 1 | Check wire from the alarm system control module to the DME control module for short to ground. |
|
Step 2 | Repair wiring harness. -> End |
| 2 | Check wire from the alarm system control module to the DME control module for open circuit. |
|
< 5 Step 3 |
Repair wiring harness. -> End |
| 3 |
|
-> End | ||