Behavior in the case of servicing
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
When removing:
- vehicle battery
- alarm siren
- alarm control centre
an activated tilt sensor will trigger an alarm. In order to carry out servicing work, the alarm siren must be switched off before starting the work. To switch it off, insert the vehicle key with valid transponder into the ignition lock and rotate to actuate the buzzer contact. Components can be removed without triggering the alarm as long as the vehicle key remains inserted.