Adjusting switch if pedal travel is too large
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Press pedal and press plunger into the switch by one notch (audible click).
The pedal travel to the switching point then decreases by approx. 3... 4 mm.
Then check setting again.