LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> 911 Speedster >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Automatic Transmission, Gears, Valve Body - 911 CARRERA (996)) >> Removing and installing pressure regulator >> Tightening torques:

Tightening torques:

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUES SPECIFICATION - PRESSURE REGULATOR

Component Tightening Torque
Holder for solenoid valves on hydraulic control unit 5 Nm (3.7 ftlb.)
Guide plate for parking lock mechanism on transmission housing 23 Nm (17 ftlb.)
ATF pan on transmission housing 10 Nm (7.5 ftlb.)
Drain plug on ATF pan 40 Nm (30 ftlb.)
ATF filler screw on ATF pan 80 Nm (59 ftlb.)