Reassembling the hydraulic and electrical control unit

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Place the control unit carefully in position. The guide pin must engage in the guide bore of the hydraulic control unit.

Fig 1: Engaging Guide Pin In Guide Bore Of Hydraulic Control Unit (As Of MY 2002)
Courtesy of PORSCHE OF NORTH AMERICA, INC.