LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> 911 Speedster >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Automatic Transmission, Gears, Valve Body - 911 CARRERA (996)) >> Disassembling and assembling electrohydraulic control unit (as of MY 2002) >> Installing solenoid and control valve

Installing solenoid and control valve

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Press in new magnet or control valve -6 to 11-  . Ensure correct seating. See Figure .
  2. Fit leaf spring -5-  and screw in screw -3-  . See Figure .
  3. Fit plastic cover -1 or 2-  . See Figure .
scientia non olet · About LEMON Manuals