LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> 911 Speedster >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Automatic Transmission, Gears, Valve Body - 911 CARRERA (996)) >> Disassembling and assembling electrohydraulic control unit (as of MY 2002) >> Disconnecting hydraulic and electrical control unit

Disconnecting hydraulic and electrical control unit

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove electrical control unit -12-  in Figure . To do so, bend back the retaining lug at the strengthening rib on the oil temperature sensor.
    Fig 1: Locating Retaining Lug At The Strengthening Rib On The Oil Temperature Sensor (As Of MY 2002)
    G03105490Courtesy of PORSCHE OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals