Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Oil separator to bracket for oil/water heat exchanger | External Torx screw, M6 x 20 | Tightening torque | 13 Nm (9.5 ft. lb.) | ||
| Cable duct to intake-air distributor | External Torx screw (E10) | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Engine mounting | Special nut, M12 (internal Torx T55) | Tightening torque | 85 Nm (63 ft. lb.) |