LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> 911 Speedster >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 10 - Engine - Crankcase, Suspension -- CARRERA (997) >> WM 103619 Removing And Installing Control Unit For Active Engine Mounting (PADM) >> Removing Control Unit For Active Engine Mounting (PADM)

Removing Control Unit For Active Engine Mounting (PADM)

NOTE: Voltage peaks
  • Risk of damage to load or to the control unit

→ Remove the ignition key and switch off load before disconnecting or removing load.

Fig 1: Identifying Ignition Key Installation Position
G09816126Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Unscrew the three fastening nuts -1-  .
    Fig 2: Removing Control Unit
    G09816127Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Release the electric plug connection -a-  and pull the connector off the control unit.
  3. Remove control unit.
scientia non olet · About LEMON Manuals