Installing Engine Mounting

→ Secure components to prevent them from falling down.

1. Insert engine mounting -1-  at engine carrier and at the same time guide the threaded bolt -2-  through the bearing eyelet on the engine carrier.
   Fig 1: Identifying Vehicle Engine Mounting

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Insert two hexagon-head bolts M8 x 60 and tighten them. → Tightening torque: 23 Nm (17 ft. lb.)  .
3. Position collar nut M12 (internal Torx screw, screw insert T55) at threaded bolt of engine carrier and tighten it. → Tightening torque: 85 Nm (63 ft. lb.) 
4. Lower jack together with transmission jack plate and push out of work area.
5. Fit air cleaner housing.

   → 242519 REMOVING AND INSTALLING AIR CLEANER HOUSING .